cookbook 'tar', '= 1.1.0'
The tar cookbook has been deprecated
Author provided reason for deprecation:
The tar cookbook has been deprecated and is no longer being maintained by its authors. Use of the tar cookbook is no longer recommended.
tar
(20) Versions
1.1.0
-
Follow21
Installs tar and two resources to manage remote tar packages
cookbook 'tar', '= 1.1.0', :supermarket
knife supermarket install tar
knife supermarket download tar
tar Cookbook
Installs tar and includes resources for managing remote tar files. tar_package
handles remote source package compilation. tar_extract
handles retrieving remote tar files and extracting them locally.
Resources
tar_package
A tar_package
LWRP provides an easy way to download remote files and compile and install them. This only works for the most basic Autoconf programs that can do ./configure && make && make install
.
Actions
- :install: Installs the package
Properties
- source: name attribute. The source remote URL.
- prefix: Directory to be used as the
--prefix
configure flag. - source_directory: Directory to which source files are download.
- creates: A file this command creates - if the file exists, the command will not be run.
- configure_flags: Array of additional flags to be passed to
./configure
. - archive_name: Specify a different name for the downloaded archive. Use it if the directory name inside the tar file is different than the name defined in the URL. Additionally,
tar_package
supports mostremote_file
attributes.
Example
tar_package 'http://pgfoundry.org/frs/download.php/1446/pgpool-3.4.1.tar.gz' do
prefix '/usr/local'
creates '/usr/local/bin/pgpool'
end
This will download, compile, and install the package from the given URL and install it into /usr/local.
tar_extract
A tar_extract
LWRP provides an easy way to download remote tar files and extract them to a local directory.
Actions
- :extract: Extracts the tar file from a url
- :extract_local: Extracts the tar file from a local file path
Properties
- source: name attribute. The source remote URL.
- target_dir: Directory to extract into, e.g. tar xzf -C (target_dir)
- download_dir: Directory to which tarball is downloaded (defaults to chef cache which requires root
group
anduser
). - creates: A file this command creates - if the file exists, the command will not be run.
- compress_char: Flag for compression type, such as
z
forgzip
.man tar
for options. - tar_flags: Array of additional flags to be passed to tar xzf command.
- group: Group name or group ID to extract the archive under. If set to non-root group, point to a
download_dir
the group has permission to access. - user: User name or user ID to extract the archive under. If set to non-root user, point to a
download_dir
the user has permission to access. Additionally,tar_extract
supports mostremote_file
attributes.
Example
tar_extract 'http://dev.mycoderepo.com/artifacts/mycode-1.2.3.tar.gz' do
target_dir '/opt/myapp/mycode'
creates '/opt/myapp/mycode/lib'
tar_flags [ '-P', '--strip-components 1' ]
end
This will download the tarball to cache, extract the contents to /opt/myapp/mycode, use the file '/opt/myapp/mycode/lib' to determine idempotency, and pass both '-P' and '--strip-components 1' flags to the tar xzf command.
tar_extract '/tmp/mycode-1.2.3.tar.gz' do
action :extract_local
target_dir '/opt/myapp/mycode'
creates '/opt/myapp/mycode/lib'
end
This will extract the contents of /tmp/mycode-1.2.3.tar.gz to /opt/myapp/mycode and use the file '/opt/myapp/mycode/lib' to determine idempotency.
ChefSpec Matchers
ChefSpec matchers are defined for tar_package and tar_extract.
LICENSE AND AUTHOR
Author:: Nathan L Smith (nathan@cramerdev.com) Author:: George Miranda (gmiranda@chef.io) Author:: Mark Van de Vyver (mark@@taqtiqa.com)
Copyright 2011, Cramer Development, Inc. Copyright 2011, Opscode, Inc. Copyright 2013, TAQTIQA LLC.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
Dependent cookbooks
This cookbook has no specified dependencies.
Contingent cookbooks
tar Cookbook CHANGELOG
This file is used to list changes made in each version of the tar cookbook.
1.1.0 (2016-12-21)
- added support for .xz compression type
- Reformat the readme
- Define both Chefspec matchers
- Remove Chef 11 compatibility code
1.0.0 (2016-12-21)
- This cookbook has been adopted by Chef and will be maintained by the Community Cookbook Team going forward.
- This cookbook now requires Chef 12.1+ to align with the requirements of all Chef maintained cookbooks
-
Cookbook boilerplate has been updated
- chefignore file added
- gitignore file
- Test Kitchen config added
- Berksfile added
- Gemfile added
- Badges added to the readme
- Add maintainers files
- Add rakefile for simplified testing
- Add github templates
- Add license file
- Update author in metadata and add supermarket metadata
- Add contributing and testing docs
- Cookstyle fixes
- Add basic chefspec convergence test
- Add a basic test cookbook
- Add test kitchen testing in Travis
v0.7.0 (2015-07-08)
- Add adoption notice
- Use
file_cache_path
instead offile_backup_path
for downloaded artifact storage - Fix links to Chef documentation in README
v0.6.0 (2014-12-03)
- Allow either string or array for tar flags
v0.5.0 (2014-07-28)
- Add support for more attributes of
remote_file
- Escape downloaded file names
v0.4.0 (2014-06-13)
- Add
archive_name
option for when the file name is different from the package name
v0.3.4 (2014-06-05)
- Define ChefSpec::Runner method for tar_extract
v0.3.3 (2014-06-03)
- Add ChefSpec matchers
v0.3.2 (2014-05-05)
- Add checksum to remote file downloads
v0.3.1 (2014-04-04)
- Correct "notifies" definition in tar_extract's remote_file
v0.3.0 (2014-03-21)
- Add
:extract_local
action
v0.2.0 (2013-12-31)
- Make
tar_extract
only run if needed - Fix missing space in command line prefix
- Ensure
file_backup_path
exists on initial chef-client run - Only add headers if needed
v0.1.0 (2013-11-26)
- Allow custom HTTP headers when downloading files
- Allow the type of tar compression
- Improve resource notifications
v0.0.4 (2013-10-02)
- Remove conditional download requests in favor of built-in functionality in Chef >= 11.6.0.
- Fix readme example
- Foodcritic fixes
v0.0.3 (2013-01-30)
- Conditional requests for downloads
- Allow extract if non-root user
- Formatting fixes
v0.0.2 (2012-10-13)
- Add
tar_extract
LWRP
v0.0.1 (2011-09-15)
Initial release
Collaborator Number Metric
1.1.0 passed this metric
Foodcritic Metric
1.1.0 passed this metric
License Metric
1.1.0 passed this metric
1.1.0 passed this metric
1.1.0 passed this metric
License Metric
1.1.0 passed this metric
1.1.0 passed this metric