Adoptable Cookbooks List

Looking for a cookbook to adopt? You can now see a list of cookbooks available for adoption!
List of Adoptable Cookbooks

Supermarket Belongs to the Community

Supermarket belongs to the community. While Chef has the responsibility to keep it running and be stewards of its functionality, what it does and how it works is driven by the community. The chef/supermarket repository will continue to be where development of the Supermarket application takes place. Come be part of shaping the direction of Supermarket by opening issues and pull requests or by joining us on the Chef Mailing List.

Select Badges

Select Supported Platforms

Select Status

RSS

nginx (113) Versions 7.0.1

Installs and configures nginx

Policyfile
Berkshelf
Knife
cookbook 'nginx', '= 7.0.1', :supermarket
cookbook 'nginx', '= 7.0.1'
knife supermarket install nginx
knife supermarket download nginx
README
Dependencies
Changelog
Quality 100%

nginx Cookbook

Cookbook Build Status

Installs nginx from package OR source code and sets up configuration handling similar to Debian's Apache2 scripts.

Requirements

Cookbooks

The following cookbooks are direct dependencies because they're used for common "default" functionality.

  • build-essential for source installations
  • ohai for setting up the ohai plugin
  • compat_resource for setting up the nginx.org repository on Chef 12.1 - 12.13
  • yum-epel for setting up the EPEL repository on RHEL platforms
  • zypper for setting up the nginx.org repository on Suse platforms

Platforms

The following platforms are supported and tested with Test Kitchen:

  • Ubuntu 14.04+
  • CentOS 6+
  • Debian 7+
  • openSUSE
  • FreeBSD

Other Debian and RHEL family distributions are assumed to work.

Chef

  • Chef 12.1+

Attributes

Node attributes for this cookbook are logically separated into different files. Some attributes are set only via a specific recipe.

nginx::auth_request

These attributes are used in the nginx::auth_request recipe.

  • node['nginx']['auth_request']['url'] - The url to the auth_request module tar.gz file
  • node['nginx']['auth_request']['checksum'] - The checksum of the auth_request module tar.gz file

nginx::default

Generally used attributes. Some have platform specific values. See attributes/default.rb. "The Config" refers to "nginx.conf" the main config file.

  • node['nginx']['dir'] - Location for nginx configuration.
  • node['nginx']['conf_template'] - The source template to use when creating the nginx.conf.
  • node['nginx']['conf_cookbook'] - The cookbook where node['nginx']['conf_template'] resides.
  • node['nginx']['log_dir'] - Location for nginx logs.
  • node['nginx']['log_dir_perm'] - Permissions for nginx logs folder.
  • node['nginx']['user'] - User that nginx will run as.
  • node['nginx']['group'] - Group for nginx.
  • node['nginx']['port'] - Port for nginx to listen on.
  • node['nginx']['binary'] - Path to the nginx binary.
  • node['nginx']['init_style'] - How to run nginx as a service when using nginx::source. Values can be "upstart", "systemd", or "init". This attribute is not used in the package recipe because the package manager's init script style for the platform is assumed.
  • node['nginx']['cleanup_runit'] - Cleanup existing runit based nginx service installation. Uses the nginx_cleanup_runit resource. Default: true
  • node['nginx']['upstart']['foreground'] - Set this to true if you want upstart to run nginx in the foreground, set to false if you want upstart to detach and track the process via pid.
  • node['nginx']['upstart']['runlevels'] - String of runlevels in the format '2345' which determines which runlevels nginx will start at when entering and stop at when leaving.
  • node['nginx']['upstart']['respawn_limit'] - Respawn limit in upstart stanza format, count followed by space followed by interval in seconds.
  • node['nginx']['keepalive'] - Whether to use keepalive_timeout, any value besides "on" will leave that option out of the config.
  • node['nginx']['keepalive_requests'] - used for config value of keepalive_requests.
  • node['nginx']['keepalive_timeout'] - used for config value of keepalive_timeout.
  • node['nginx']['worker_processes'] - used for config value of worker_processes.
  • node['nginx']['worker_connections'] - used for config value of events { worker_connections }
  • node['nginx']['worker_rlimit_nofile'] - used for config value of worker_rlimit_nofile. Can replace any "ulimit -n" command. The value depend on your usage (cache or not) but must always be superior than worker_connections.
  • node['nginx']['worker_shutdown_timeout'] - used for config value of worker_shutdown_timeout.
  • node['nginx']['worker_connections'] - used for config value of events { worker_connections }
  • node['nginx']['multi_accept'] - used for config value of events { multi_accept }. Try to accept() as many connections as possible. Disable by default.
  • node['nginx']['event'] - used for config value of events { use }. Set the event-model. By default nginx looks for the most suitable method for your OS.
  • node['nginx']['accept_mutex_delay'] - used for config value of accept_mutex_delay
  • node['nginx']['server_tokens'] - used for config value of server_tokens.
  • node['nginx']['server_names_hash_bucket_size'] - used for config value of server_names_hash_bucket_size.
  • node['nginx']['disable_access_log'] - set to true to disable the general access log, may be useful on high traffic sites.
  • node['nginx']['access_log_options'] - Set to a string of additional options to be appended to the access log directive
  • node['nginx']['error_log_options'] - Set to a string of additional options to be appended to the error log directive
  • node['nginx']['default_site_enabled'] - enable the default site
  • node['nginx']['sendfile'] - Whether to use sendfile. Defaults to "on".
  • node['nginx']['tcp_nopush'] - Whether to use tcp_nopush. Defaults to "on".
  • node['nginx']['tcp_nodelay'] - Whether to use tcp_nodelay. Defaults to "on".
  • node['nginx']['install_method'] - Whether nginx is installed from packages or from source.
  • node['nginx']['types_hash_max_size'] - Used for the types_hash_max_size configuration directive.
  • node['nginx']['types_hash_bucket_size'] - Used for the types_hash_bucket_size configuration directive.
  • node['nginx']['proxy_read_timeout'] - defines a timeout (between two successive read operations) for reading a response from the proxied server.
  • node['nginx']['client_body_buffer_size'] - used for config value of client_body_buffer_size.
  • node['nginx']['client_max_body_size'] - specifies the maximum accepted body size of a client request, as indicated by the request header Content-Length.
  • node['nginx']['repo_source'] - when installed from a package this attribute affects which yum repositories, if any, will be added before installing the nginx package. The default value of 'epel' will use the yum-epel cookbook, 'nginx' will use the nginx::repo recipe, 'passenger' will use the 'nginx::repo_passenger' recipe, and setting no value will not add any additional repositories.
  • node['nginx']['sts_max_age'] - Enable Strict Transport Security for all apps (See: http://en.wikipedia.org/wiki/HTTP_Strict_Transport_Security). This attribute adds the following header: Strict-Transport-Security max-age=SECONDS to all incoming requests and takes an integer (in seconds) as its argument.
  • node['nginx']['default']['modules'] - Array specifying which modules to enable via the conf-enabled config include function. Currently the only valid value is "socketproxy".
  • node['nginx']['load_modules'] - Array of paths to modules to dynamically load on nginx startup using the load_module directive. Default is [].

authorized_ips module

  • node['nginx']['remote_ip_var'] - The remote ip variable name to use.
  • node['nginx']['authorized_ips'] - IPs authorized by the module

gzip module

  • node['nginx']['gzip'] - Whether to use gzip, can be "on" or "off"
  • node['nginx']['gzip_http_version'] - used for config value of gzip_http_version.
  • node['nginx']['gzip_comp_level'] - used for config value of gzip_comp_level.
  • node['nginx']['gzip_proxied'] - used for config value of gzip_proxied.
  • node['nginx']['gzip_vary'] - used for config value of gzip_vary.
  • node['nginx']['gzip_buffers'] - used for config value of gzip_buffers.
  • node['nginx']['gzip_types'] - used for config value of gzip_types - must be an Array.
  • node['nginx']['gzip_min_length'] - used for config value of gzip_min_length.
  • node['nginx']['gzip_disable'] - used for config value of gzip_disable.
  • node['nginx']['gzip_static'] - used for config value of gzip_static (http_gzip_static_module must be enabled)

Other configurations

  • node['nginx']['extra_configs'] - a Hash of key/values to nginx configuration.

nginx::devel

These attributes are used in the nginx::ngx_devel_module recipe.

  • node['nginx']['devel']['version'] - The version of the nginx devel module
  • node['nginx']['devel']['url'] - The URL of the nginx devel module tar.gz file
  • node['nginx']['devel']['checksum'] - The checksum of the nginx devel module tar.gz file

nginx::echo

These attributes are used in the nginx::http_echo_module recipe.

  • node['nginx']['echo']['version'] - The version of http_echo you want (default: 0.59)
  • node['nginx']['echo']['url'] - URL for the tarball.
  • node['nginx']['echo']['checksum'] - Checksum of the tarball.

nginx::geoip

These attributes are used in the nginx::http_geoip_module recipe. Please note that the country_dat_checksum and city_dat_checksum are based on downloads from a datacenter in Fremont, CA, USA. You really should override these with checksums for the geo tarballs from your node location.

Note The upstream, maxmind.com, may block access for repeated downloads of the data files. It is recommended that you download and host the data files, and change the URLs in the attributes.

  • node['nginx']['geoip']['path'] - Location where to install the geoip libraries.
  • node['nginx']['geoip']['enable_city'] - Whether to enable City data
  • node['nginx']['geoip']['country_dat_url'] - Country data tarball URL
  • node['nginx']['geoip']['country_dat_checksum'] - Country data tarball checksum
  • node['nginx']['geoip']['city_dat_url'] - City data tarball URL
  • node['nginx']['geoip']['city_dat_checksum'] - City data tarball checksum
  • node['nginx']['geoip']['lib_version'] - Version of the GeoIP library to install
  • node['nginx']['geoip']['lib_url'] - (Versioned) Tarball URL of the GeoIP library
  • node['nginx']['geoip']['lib_checksum'] - Checksum of the GeoIP library tarball

nginx::http_realip_module

From: http://nginx.org/en/docs/http/ngx_http_realip_module.html

  • node['nginx']['realip']['header'] - Header to use for the RealIp Module; only accepts "X-Forwarded-For" or "X-Real-IP"
  • node['nginx']['realip']['addresses'] - Addresses to use for the http_realip configuration.
  • node['nginx']['realip']['real_ip_recursive'] - If recursive search is enabled, the original client address that matches one of the trusted addresses is replaced by the last non-trusted address sent in the request header field. Can be on "on" or "off" (default).

nginx::ohai_plugin

The ohai_plugin recipe includes an Ohai plugin. It will be automatically installed and activated, providing the following attributes via ohai, no matter how nginx is installed (source or package):

  • node['nginx']['version'] - version of nginx
  • node['nginx']['configure_arguments'] - options passed to ./configure when nginx was built
  • node['nginx']['prefix'] - installation prefix
  • node['nginx']['conf_path'] - configuration file path

In the source recipe, it is used to determine whether control attributes for building nginx have changed.

nginx::openssl_source

These attributes are used in the nginx::openssl_source recipe.

  • node['nginx']['openssl_source']['version'] - The version of OpenSSL you want to download and use (default: 1.0.1t)
  • node['nginx']['openssl_source']['url'] - The url for the OpenSSL source

nginx::passenger

These attributes are used in the nginx::passenger recipe.

  • node['nginx']['passenger']['version'] - passenger gem version
  • node['nginx']['passenger']['root'] - passenger gem root path
  • node['nginx']['passenger']['install_rake'] - set to false if rake already present on system
  • node['nginx']['passenger']['max_pool_size'] - maximum passenger pool size (default=10)
  • node['nginx']['passenger']['ruby'] - Ruby path for Passenger to use (default=$(which ruby))
  • node['nginx']['passenger']['spawn_method'] - passenger spawn method to use (default=smart-lv2)
  • node['nginx']['passenger']['buffer_response'] - turns on or off response buffering (default=on)
  • node['nginx']['passenger']['max_pool_size'] - passenger maximum pool size (default=6)
  • node['nginx']['passenger']['min_instances'] - minimum instances (default=1)
  • node['nginx']['passenger']['max_instances_per_app'] - maximum instances per app (default=0)
  • node['nginx']['passenger']['pool_idle_time'] - passenger pool idle time (default=300)
  • node['nginx']['passenger']['max_requests'] - maximum requests (default=0)
  • node['nginx']['passenger']['nodejs'] - Nodejs path for Passenger to use (default=nil)
  • node['nginx']['passenger']['show_version_in_header'] - Show passenger version in HTTP headers (default=on)

Basic configuration to use the official Phusion Passenger repositories:

  • node['nginx']['repo_source'] - 'passenger'
  • node['nginx']['package_name'] - 'nginx-extras'
  • node['nginx']['passenger']['install_method'] - 'package'

nginx::rate_limiting

  • node['nginx']['enable_rate_limiting'] - set to true to enable rate limiting (limit_req_zone in nginx.conf)
  • node['nginx']['rate_limiting_zone_name'] - sets the zone in limit_req_zone.
  • node['nginx']['rate_limiting_backoff'] - Incorrect name, retained for compatibility reasons - sets the size of the shared memory zone (default=10m, 10 megabytes)
  • node['nginx']['rate_limit'] - set the rate limit amount for limit_req_zone.

nginx::repo

  • node['nginx']['upstream_repository'] - the URL to use for the package repository resource; default is set based on platform type
  • node['nginx']['repo_signing_key'] - The URL from which package signing/gpg key is retrieved

nginx::socketproxy

These attributes are used in the nginx::socketproxy recipe.

  • node['nginx']['socketproxy']['root'] - The directory (on your server) where socketproxy apps are deployed.
  • node['nginx']['socketproxy']['default_app'] - Static assets directory for requests to "/" that don't meet any proxy_pass filter requirements.
  • node['nginx']['socketproxy']['apps']['app_name']['prepend_slash'] - Prepend a slash to requests to app "app_name" before sending them to the socketproxy socket.
  • node['nginx']['socketproxy']['apps']['app_name']['context_name'] - URI (e.g. "app_name" in order to achieve "http://mydomain.com/app_name") at which to host the application "app_name"
  • node['nginx']['socketproxy']['apps']['app_name']['subdir'] - Directory (under node['nginx']['socketproxy']['root']) in which to find the application.

nginx::source

These attributes are used in the nginx::source recipe. Some of them are dynamically modified during the run. See attributes/source.rb for default values.

  • node['nginx']['source']['url'] - (versioned) URL for the nginx source code. By default this will use the version specified as node['nginx']['version'].
  • node['nginx']['source']['prefix'] - (versioned) prefix for installing nginx from source
  • node['nginx']['source']['conf_path'] - location of the main config file, in node['nginx']['dir'] by default.
  • node['nginx']['source']['modules'] - Array of modules that should be compiled into nginx by including their recipes in nginx::source.
  • node['nginx']['source']['default_configure_flags'] - The default flags passed to the configure script when building nginx.
  • node['nginx']['configure_flags'] - Preserved for compatibility and dynamically generated from the node['nginx']['source']['default_configure_flags'] in the nginx::source recipe.
  • node['nginx']['source']['use_existing_user'] - set to true if you do not want nginx::source recipe to create system user with name node['nginx']['user'].

nginx::status

These attributes are used in the nginx::http_stub_status_module recipe.

  • node['nginx']['status']['port'] - The port on which nginx will serve the status info (default: 8090)

nginx::syslog

These attributes are used in the nginx::syslog_module recipe.

  • node['nginx']['syslog']['git_repo'] - The git repository url to use for the syslog patches.
  • node['nginx']['syslog']['git_revision'] - The revision on the git repository to checkout.

nginx::upload_progress

These attributes are used in the nginx::upload_progress_module recipe.

  • node['nginx']['upload_progress']['url'] - URL for the tarball.
  • node['nginx']['upload_progress']['checksum'] - Checksum of the tarball.
  • node['nginx']['upload_progress']['javascript_output'] - Output in javascript. Default is true for backwards compatibility.
  • node['nginx']['upload_progress']['zone_name'] - Zone name which will be used to store the per-connection tracking information. Default is proxied.
  • node['nginx']['upload_progress']['zone_size'] - Zone size in bytes. Default is 1m (1 megabyte).

Resources

nginx_site

Enable or disable a Server Block in #{node['nginx']['dir']}/sites-available by calling nxensite or nxdissite (introduced by this cookbook) to manage the symbolic link in #{node['nginx']['dir']}/sites-enabled.

Actions

  • enable - Enable the nginx site (default)
  • disable - Disable the nginx site

Properties:

  • name - (optional) Name of the site to enable. By default it's assumed that the name of the nginx_site resource is the site name, but this allows overriding that.
  • template - (optional) Path to the source for the template resource.
  • variables - (optional) Variables to be used with the template resource

nginx_cleanup_runit

A simple resource to remove existing runit based nginx service installations. This is used in the default nginx recipe to stop runit based nginx services and cleanup runit service configs before setting up nginx under the system's own init system.

Actions

  • cleanup - Stop runit based nginx and remove runit configs (default)

Usage

This cookbook provides three distinct installation methods, all of which are controlled via attributes and executed using the nginx::default recipe.

Package installation using the nginx.org repositories

Nginx provides repositories for RHEL, Debian/Ubuntu, and Suse platforms with up to date packages available on older distributions. Due to the age of many nginx packages shipping with distros we believe this is the ideal installation method. With no attributes set the nginx.org repositories will be added to your system and nginx will be installed via package. This provides a solid out of the box install for most users.

Package installation using distro repositories

If you prefer to use the packages included in your distro or to roll your own packages you'll want to set node['nginx']['repo_source'] to nil or distro to skip the repository setup. The default recipe will still install nginx from packages, but you'll retain control over the package location.

Source installation to compile non-dynamic modules

If you need control over how nginx is built, or you need non-dynamic modules to be included you'll need to compile nginx from source. We highly recommend against using this method as it requires the installation of a full compilation toolchain and development dependencies on your nodes. Creating your own packages with nginx compiled as necessary is a preferred option. If that's not possible you can set node['nginx']['install_method'] to source and provide a version in node['nginx']['version'].

Specifying Modules to compile

The following recipes are used to build module support into nginx. To compile a module, add its recipe name to the array attribute node['nginx']['source']['modules'].

  • ipv6.rb - enables IPv6 support
  • headers_more_module -
  • http_auth_request_module`
  • http_echo_module.rb - downloads the http_echo_module module and enables it as a module when compiling nginx.
  • http_geoip_module.rb - installs the GeoIP libraries and data files and enables the module for compilation.
  • http_gzip_static_module.rb - enables the module for compilation. Be sure to set node['nginx']['gzip_static'] = 'yes'.
  • http_mp4_module -
  • http_perl_module.rb - enables embedded Perl for compilation.
  • http_realip_module.rb - enables the module for compilation and creates the configuration.
  • http_spdy_module -
  • http_ssl_module.rb - enables SSL for compilation.
  • http_stub_status_module.rb - provides nginx_status configuration and enables the module for compilation.
  • http_v2_module
  • ipv6 -
  • naxsi_module - enables the naxsi module for the web application firewall for nginx.
  • ngx_devel_module -
  • ngx_lua_module -
  • openssl_source.rb - downloads and uses custom OpenSSL source when compiling nginx
  • pagespeed_module-
  • passenger - builds the passenger gem and configuration for "mod_passenger".
  • set_misc -
  • syslog_module - enables syslog support for nginx. This only works with source builds. See https://github.com/yaoweibin/nginx_syslog_patch -
  • upload_progress_module.rb - builds the upload_progress module and enables it as a module when compiling nginx.

Resources

nginx_site

Enable or disable a Server Block in #{node['nginx']['dir']}/sites-available by calling nxensite or nxdissite (introduced by this cookbook) to manage the symbolic link in #{node['nginx']['dir']}/sites-enabled.

Actions

  • enable - Enable the nginx site (default)
  • disable - Disable the nginx site

Properties:

  • name - (optional) Name of the site to enable. By default it's assumed that the name of the nginx_site resource is the site name, but this allows overriding that.
  • template - (optional) Path to the source for the template resource.
  • cookbook - (optional) The cookbook that contains the template source.
  • variables - (optional) Variables to be used with the template resource

Adding New Modules

Previously we'd add each possible module to this cookbook itself. That's not necessary using wrapper cookbooks and we'd prefer to not add any addition module recipes at this time. Instead in your nginx wrapper cookbook setup any necessary packages and then include the follow code to add the module to the list of modules to compile:

node.run_state['nginx_configure_flags'] =
  node.run_state['nginx_configure_flags'] | ['--with-SOMETHING', "--with-SOME_OPT='things'"]

Maintainers

This cookbook is maintained by Chef's Community Cookbook Engineering team. Our goal is to improve cookbook quality and to aid the community in contributing to cookbooks. To learn more about our team, process, and design goals see our team documentation. To learn more about contributing to cookbooks like this see our contributing documentation, or if you have general questions about this cookbook come chat with us in #cookbok-engineering on the Chef Community Slack

License

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.

Dependent cookbooks

build-essential >= 0.0.0
ohai >= 4.1.0
yum-epel >= 0.0.0
compat_resource >= 12.16.3
zypper >= 0.0.0

Contingent cookbooks

aegir Applicable Versions
aegir3 Applicable Versions
alfresco-webserver Applicable Versions
app Applicable Versions
application_nginx Applicable Versions
application_static Applicable Versions
archiva Applicable Versions
base_image Applicable Versions
berkshelf Applicable Versions
berkshelf-api-server Applicable Versions
berkshelf-api-server-ya Applicable Versions
boxbilling Applicable Versions
cabot Applicable Versions
cassandra-opscenter Applicable Versions
certbot Applicable Versions
chef-jellyfish Applicable Versions
chef-server Applicable Versions
cloudfoundry-cloud_controller Applicable Versions
cloudfoundry-nginx Applicable Versions
config-driven-helper Applicable Versions
cyclesafe_chef Applicable Versions
devpi Applicable Versions
docker-registry2 Applicable Versions
dokku Applicable Versions
drone Applicable Versions
elasticsearch_cluster Applicable Versions
elkstack Applicable Versions
errbit Applicable Versions
etherpad-lite Applicable Versions
eulipion-slate Applicable Versions
fanfare Applicable Versions
frog Applicable Versions
gem_server Applicable Versions
geminabox Applicable Versions
gemirro Applicable Versions
ghost Applicable Versions
github_connector Applicable Versions
gitlab Applicable Versions
gitlab-server Applicable Versions
gitpaste Applicable Versions
grafana Applicable Versions
huginn Applicable Versions
ice Applicable Versions
insight Applicable Versions
iptables_web Applicable Versions
ipynb Applicable Versions
ish Applicable Versions
jenkins Applicable Versions
jenkins-server Applicable Versions
kibana5-gm Applicable Versions
kibana_lwrp Applicable Versions
kloudspeaker Applicable Versions
kong Applicable Versions
lemur Applicable Versions
looker Applicable Versions
lxc-web-panel Applicable Versions
magento Applicable Versions
maven-deploy Applicable Versions
mediacore Applicable Versions
met-jenkins Applicable Versions
mirage Applicable Versions
modcloth-hubot Applicable Versions
moodle Applicable Versions
mozilla-firefox-sync Applicable Versions
mozilla-sync Applicable Versions
mruby Applicable Versions
munin Applicable Versions
myusa Applicable Versions
nagios Applicable Versions
nexus Applicable Versions
nginx-hardening Applicable Versions
nginx-proxy Applicable Versions
nginx_conf Applicable Versions
nginx_fallback_to_apache Applicable Versions
nginx_simplecgi Applicable Versions
nginxsite Applicable Versions
ngx Applicable Versions
nodejs-deploy Applicable Versions
nodestack Applicable Versions
noosfero Applicable Versions
oc-id Applicable Versions
ohmage Applicable Versions
omakase Applicable Versions
opennms Applicable Versions
opsworks_ruby Applicable Versions
owncloud Applicable Versions
paramount Applicable Versions
passenger_enterprise Applicable Versions
phabricator Applicable Versions
phpstack Applicable Versions
pita Applicable Versions
piwik Applicable Versions
postfixadmin Applicable Versions
prose Applicable Versions
pythonstack Applicable Versions
rackbox Applicable Versions
rackspace_nginx_php Applicable Versions
rails_application Applicable Versions
railsbox Applicable Versions
redirect Applicable Versions
redmine2 Applicable Versions
reprepro Applicable Versions
request_tracker Applicable Versions
roundcube Applicable Versions
rubycas Applicable Versions
rundeck-alt Applicable Versions
sensu_admin Applicable Versions
sinatra Applicable Versions
snipe-it Applicable Versions
spree Applicable Versions
stack_commons Applicable Versions
storj Applicable Versions
strongloop Applicable Versions
sudo_consul Applicable Versions
supermarket Applicable Versions
symfony Applicable Versions
teleport-le Applicable Versions
thumbor Applicable Versions
thumbor_ng Applicable Versions
webapp Applicable Versions
wordpress Applicable Versions
ya-piwik Applicable Versions
zabbix Applicable Versions
zabbix_lwrp Applicable Versions
zammad Applicable Versions

nginx Cookbook CHANGELOG

This file is used to list changes made in each version of the nginx cookbook.

7.0.1 (2017-11-14)

  • Move passenger test attributes into the cookbook
  • Resolve FC108 warning

7.0.0 (2017-09-18)

Breaking Changes

  • This release of the nginx cookbook merges all changes that occurred within the chef_nginx fork from 2.8 - 6.2. This includes multiple breaking changes along with a large number of improvements and bug fixes. If you're upgrading from 2.7 to current make sure to read the whole changelog to make sure you're ready.

Other Changes

  • Added a new resource nginx_runit_cleanup has been introduced which stops the existing nginx runit service and removes the init files. This is now called automatically from the default recipe to cleanup an existing installation. This should make it possible for users to migrate from the 2.X release to the current w/o manual steps.
  • Fixed compile failures on Fedora and any other distros released in the future which use GCC 7
  • Added the .m3u8 mimetype
  • Moved all files out of the files/default directory since this isn't required with Chef 12 and later
  • Added ulimit to the nginx sysconfig file for RHEL platforms

6.2.0 (2017-09-12)

  • Install basic configuration before starting the nginx service
  • Correct documentation for rate_limiting_backoff attribute
  • Phusion Passenger distro has pid file location in /run/nginx.pid
  • [GH-92] add a test suite for passenger install
  • Swap the maintainer files for a readme section
  • Update nginx version [1.12.1] and checksum attributes for source installs
  • Update versions and checksums for lua-nginx-module and echo-nginx-module
  • Simplify repo logic and use HTTPS repos

6.1.1 (2017-06-08)

  • Use multipackage installs in the pagespeed recipe to speed things up
  • Several fixes for Amazon Linux on Chef 13+

6.1.0 (2017-06-07)

  • Add attributes for setting the repository URLs
  • Fix support for Amazon Linux repos on Chef 13+

6.0.3 (2017-06-05)

  • Correctly compare nginx versions with multiple digits so 1.10 is properly recognized as coming after 1.2.

6.0.2 (2017-04-27)

  • Resolve name conflicts in the resource

6.0.1 (2017-04-04)

  • double quotes are unnecessary in lua configure flags

6.0.0 (2017-03-25)

Breaking change

  • Support for Runit as an init system has been removed. If you require runit you will need to pin to the 5.X cookbook release. We highly recommend using either systemd or upstart instead of Runit.

Other changes

  • Install nginx 1.10.3 for source based installs
  • Remove freebsd cookbook from testing as it's not necessary anymore
  • Bump OpenSSL to 1.0.2k

5.1.3 (2017-03-24)

  • Update apache2 license string
  • Add image/svg+xml to gzip_files defaults
  • support worker_shutdown_timeout released in 1.11.11

5.1.2 (2017-03-14)

  • Setup LD options to include /usr/local/lib for libluajit in search path and bump the lua version

5.1.1 (2017-03-02)

  • Add WantedBy to systemd service file so it starts at boot
  • Avoid a warning in nginx_site by moving the template check outside the resource
  • Allow nginx_site to specify template as an array of templates

5.1.0 (2017-03-01)

  • Support the load_module directive
  • Test with Local Delivery and not Rake
  • Remove EOL platforms from the kitchen configs

5.0.7 (2017-02-12)

  • Fix Opsworks compatibility
  • Resolve a Chef 13 deprecation warning

5.0.6 (2017-01-16)

  • Rebuild shared library cache after installing luajit

5.0.5 (2017-01-09)

  • Fix typo in the pagespeed recipe

5.0.4 (2017-01-04)

  • Avoid deprecation warnings by only defining nginx service once

5.0.3 (2017-01-03)

  • Add ability to write passenger log to another location
  • Properly disable the default site with nginx.org packages

5.0.2 (2016-12-22)

  • Requite the latest compat_resource

5.0.1 (2016-12-13)

  • Use multipackage in pagespeed module recipe to speed up installs
  • Simplify the distro repo setup logic to ensure we're using the correct repos under all conditions. Previously the upstream repo was being missed on Suse systems
  • Determine pidfile location correctly via a helper so we correctly set pidfiles when using Upstream packages on Ubuntu 14.04 / 16.04. This involved removing the attribute for the pidfile location, which may cause issues if you relied on that attribute.
  • Testing improvements to make sure all suites run and the suites are testing the correct conditions

5.0.0 (2016-12-07)

Breaking changes

  • Default to the upstream nginx.org repo for package installs. The official nginx repo gives an improved experience over outdated distro releases. This can be disabled via attribute if you'd like to remain on the distro packages.

Other changes

  • Add a deprecation warning when using runit
  • Rewrite the readme usage section
  • Better document how to compile modules

4.0.2 (2016-12-01)

  • Default to openssl 1.0.2j with source installs
  • Add cookbook property to the nginx_site resource to allow using templates defined in other cookbooks
  • Prevent default docroot index.html on bad url in status
  • Readme improvements

4.0.1 (2016-10-31)

  • Fix a version check in the realip recipe
  • Align the config with the default config a bit
  • Fix the ChefSpec matchers now that nginx_site is a custom resource

4.0.0 (2016-10-31)

Breaking changes

The nginx_site definition is now a custom_resource. This improves the overall experience and allows for notifications and reporting on resource updates. It does change the behavior in some circumstances however. Previously to disable a site you would set 'enable false' on your definition. This will still function, but will result in a deprecation warning. Instead you should use 'action :disable' since this is a real resource now.

Other changes

  • Avoid splitting on compile params in the ohai plugin, which resulted in some source installs attempting to install on every Chef run.
  • Expanded testing and improved kitchen suite setup
  • Improved documentation of attributes and cookbook usage

3.2.0 (2016-10-28)

  • Reload nginx on site change

3.1.2 (2016-10-24)

  • [GH-26] Remove guard on package[nginx] resource
  • Fix pcre packages on RHEL that prevented pagespeed module compilation

3.1.1 (2016-09-21)

  • Raise on error vs. Chef::Appliation.fatal
  • Require compat_resource with notification fixes

3.1.0 (2016-09-14)

  • Resolve FC023 warnings
  • FreeBSD fixes
  • Fail hard on unsupported platforms in the source recipe
  • Install 'ca-certificates' packages with passenger
  • Add passenger_show_version_in_header config
  • Remove chef 11 compatibility
  • Replace apt/yum deps with compat_resource
  • Fix specs for freebsd source installs
  • Remove apt recipe from the repo_passenger recipe
  • Switch to += operator as << also incorrectly replaces text in root.

3.0.0 (2016-08-18)

Breaking changes

Ideally we'd offer perfect backwards compatibility forever, but in order to maintain the cookbook going forward we've evaluated the current scope of the cookbook and removed lesser used functionality that added code complexity.

  • The minimum chef-client version is now 12.1 or later, which will enables support for Ohai 7+ plugins, the ohai_plugin custom resource, and automatic init system discovery.
  • Support for Gentoo has been removed. Gentoo lacks an official Chef package and there is no Bento image to use for Test Kitchen integration tests.
  • Support for the bluepill init system has been removed. Usage of this init system has declined, and supporting it added a cookbook dependency as well as code complexity.
  • Ubuntu source installs will no longer default to runit, and will instead use either Upstart or Systemd depending on the release of Ubuntu. You can still force the use of runit by setting default['nginx']['init_style'] to 'runit'. Runit was used historically before reliable init systems were shipped with Ubuntu. Both Upstart and Systemd have the concept of restarting on failure, which was the main reason for choosing Runit over sys-v init.

Other changes

  • Don't setup the YUM EPEL repo on Fedora as it's not needed
  • Systemd based platforms will now use systemd by default for source installs
  • Retry downloads of the nginx source file as the mirror sometimes fails to load
  • Download the nginx source from the secure nginx.org site
  • Updated the Ohai plugin to avoid deprecation notices and function better on non us-en locale systems
  • Install source install pre-reqs using multi-package which speeds up Chef runs
  • Add testing in Travis with Kitchen Dokken for full integration testing of each PR
  • Add integration test on Chef 12.1 as well as the latest Chef to ensure compatibility with the oldest release we support
  • Remove installation of apt-transport-https and instead increase the apt dependency to >= 2.9.1 which includes the installation of apt-transport-https
  • Don't try to setup the nginx.org repo on Fedora as this will fail
  • Better log when trying to setup repositories on unsupported platforms
  • Fixed source_url and issue_url in the metadata to point to the correct URLs
  • Removed Chef 10 compatibility code
  • Chefspec platform updates and minor fixes
  • Replace all usage of node.set with node.normal to avoid deprecation notices
  • Remove the suse init script that isn't used anymore
  • Speed up the specs with caching
  • Move test attributes and runlists out the kitchen.yml files and into a test cookbook

2.9.0 (2016-08-12)

  • Add support for Suse Nginx.org packages

v2.8.0 (2016-08-12)

This is the first release of the nginx codebase under the chef_nginx namespace. We've chosen to bring this cookbook under the direction of the Community Cookbook Team, in order to ship a working 2.X release. The cookbook name has been changed, but all attributes are the same and compatibility has been maintained. After this 2.8.0 release we will release 3.0 as a Chef 12+ version of the cookbook and then work to add additional custom resources for managing nginx with wrapper cookbooks. Expect regular releases as we march towards a resource driven model.

  • Removed the restrictive version constraints for cookbook dependencies that prevented users from utilizing new functionality. Ohai has been pinned to < 4.0 to allow for Chef 11 compatibility, but other cookbooks have no upper limit
  • Updated all modules in the source install to their latest releases
  • Removed the GeoIP database checksums as these files are constantly updates and this causes Chef run failures
  • Updated OpenSSL for source installs to 1.0.1t
  • Updated the source install of Nginx to version 1.10.1
  • Updated the ohai recipe to install a Ohai 7+ compatible plugin on systems running Ohai 7+
  • Fixed installation of Passenger version 5.X+
  • Added a http_v2_module recipe
  • Replaced node.set usage with node.normal to avoid deprecation warnings
  • Removed the apt version pin in the Berkfile that wasn't necessary and constrained the apt version
  • Removed the lua-devel package install from the lua recipe that failed chef runs and wasn't necessary
  • Removed duplicate packages from the source module installs
  • Added a dependency on the yum cookbook which was missing from the metadata
  • Updated the mime.types file and added the charset_types configuration option to the nginx config
  • Added source_url, issue_url, and chef_version metadata
  • Fixed the pid file attribute logic for Ubuntu 16.04
  • Removed the Contributing doc that was for contributing to Opscode cookbooks
  • Updated all test dependencies in the Gemfile
  • Removed default user/group/mode declarations from resources for simplicity
  • Updated documentation for dependencies in the README
  • Added a chefignore file to limit the cookbook files that are uploaded to the chef server and speed up cookbook syncs to nodes
  • Added additional platforms to the Test Kitchen config and removed the .kitchen.cloud.yml file
  • Switched integration tests to Inspec and fixed several non-functional tests
  • Switched from Rubocop to Cookstyle and resolved all warnings
  • Added the standard Chef Rakefile for simplified testing
  • Updated Chefspecs to avoid constant deprecation warnings and converge using chef-zero on a newer Debian 8 system
  • Switch Travis CI testing to use ChefDK instead of RVM/Gem installs
  • Removed testing dependencies from the Gemfile as testing should be performed via ChefDK. Release gems are still in the Gemfile as they are not shipped with ChefDK
  • Added a maintainers.md doc and updated the contributing/testing docs to point to the Chef docs
  • Removed Guard as guard-foodcritic doesn't support the latest release which makes guard incompatible with ChefDK

v2.7.6 (2015-03-17)

  • Bugfix sites do not need a .conf suffix anymore, #338

v2.7.5 (2015-03-17)

NOTE As of this release, this cookbook in its current format is deprecated, and only critical bugs and fixes will be added. A complete rewrite is in progress, so we appreciate your patience while we sort things out. The amount of change included here

  • Fix nginx 1.4.4 archive checksum to prevent redownload, #305
  • Allow setting an empty string to prevent additional repos, #243
  • Use correct mime.types for javascript, #259
  • Fix headers_more module for source installs, #279, @josh-padnick & @miketheman
  • Remove libtool from geoip and update download paths & checksums, @miketheman
  • Fix unquoted URL with params failing geoip module build (and tests!), #294 & @miketheman
  • Fix typo in source.rb, #205
  • Test updates: ChefSpec, test-kitchen. Lots of help by @jujugrrr
  • Toolchain updates for testing
  • Adds support for tcp_nopush, tcp_nodelay @shtouff

After merging a ton of pull requests, here's a brief changelog. Click each to read more.

https://github.com/miketheman/nginx/compare/v2.7.4...v2.7.5

v2.7.4 (2014-06-06)

  • [COOK-4703] Default openssl version to 1.0.1h to address CVE-2014-0224

v2.7.2 (2014-05-27)

  • [COOK-4658] - Nginx::socketproxy if the context is blank or nonexistent, the location in the config file has a double slash at the beginning
  • [COOK-4644] - add support to nginx::repo for Amazon Linux
  • Allow .kitchen.cloud.yml to use an environment variable for the EC2 Availability Zone

v2.7.0 (2014-05-15)

  • [COOK-4643] - Update metadata lock on ohai
  • [COOK-4588] - Give more love to FreeBSD
  • [COOK-4601] - Add proxy type: Socket

v2.6.2 (2014-04-09)

[COOK-4527] - set default openssl source version to 1.0.1g to address CVE-2014-0160 aka Heartbleed

v2.6.0 (2014-04-08)

  • Reverting COOK-4323

v2.5.0 (2014-03-27)

  • [COOK-4323] - Need a resource to easily configure available sites (vhosts)

v2.4.4 (2014-03-13)

  • Updating for build-essential 2.0

v2.4.2 (2014-02-28)

Fixing bad commit from COOK-4330

v2.4.1 (2014-02-27)

  • [COOK-4345] - nginx default recipe include install type recipe directly

v2.4.0 (2014-02-27)

  • [COOK-4380] - kitchen.yml platform listings for ubuntu-10.04 and ubuntu-12.04 are missing the dot
  • [COOK-4330] - Bump nginx version for security issues (CVE-2013-0337, CVE-2013-4547)

v2.3.0 (2014-02-25)

  • COOK-4293 - Update testing Gems in nginx and fix a rubocop warnings
  • **[COOK-4237] - Nginx version incorrectly parsed on Ubuntu 13
  • **[COOK-3866] - Nginx default site folder

v2.2.2 (2014-01-23)

[COOK-3672] - Add gzip_static option

v2.2.0

No changes. Version bump for toolchain

v2.1.0

[COOK-3923] - Enable the list of packages installed by nginx::passenger to be configurable [COOK-3672] - Nginx should support the gzip_static option Updating for yum ~> 3.0 Fixing up style for rubocop Updating test-kitchen harness

v2.0.8

fixing metadata version error. locking to 3.0

v2.0.6

Locking yum dependency to '< 3'

v2.0.4

Bug

  • COOK-3808 - nginx::passenger run fails because of broken installation of package dependencies
  • COOK-3779 - Build in master fails due to rubocop error

v2.0.2

Bug

  • COOK-3808 - nginx::passenger run fails because of broken installation of package dependencies
  • COOK-3779 - Build in master fails due to rubocop error

v2.0.0

Improvement

Bug

  • COOK-3686 - Remove deprecated 'passenger_use_global_queue' directive
  • COOK-3626 - Parameterize hardcoded path to helper scripts
  • COOK-3571 - Reloda ohai plugin after installation
  • COOK-3428 - Fix an issue where access logs are not disabled when the disable_access_log attribute is set to true
  • COOK-3322 - Fix an issue where nginx::ohai_plugin fails when using source recipe
  • COOK-3241 - Fix an issue wherenginx::ohai_plugin fails unless using source recipe

New Feature

v1.8.0

Bug

  • COOK-3397 - Fix user from nginx package on Gentoo
  • COOK-2968 - Fix foodcritic failure
  • COOK-2723 - Remove duplicate passenger max_pool_size

Improvement

  • COOK-3186 - Add client_body_buffer_size and server_tokens attributes
  • COOK-3080 - Add rate-limiting support
  • COOK-2927 - Add support for real_ip_recursive directive
  • COOK-2925 - Fix ChefSpec converge
  • COOK-2724 - Automatically create directory for PID file
  • COOK-2472 - Bump nginx version to 1.2.9
  • COOK-2312 - Add additional mine_types to the gzip_types value

New Feature

  • COOK-3183 - Allow inclusion in extra-cookbook modules

v1.7.0

Improvement

  • [COOK-3030]: The repo_source attribute should allow you to not add any additional repositories to your node

Sub-task

  • [COOK-2738]: move nginx::passenger attributes to nginx/attributes/passenger.rb

v1.6.0

Task

  • [COOK-2409]: update nginx::source recipe for new runit_service resource
  • [COOK-2877]: update nginx cookbook test-kitchen support to 1.0 (alpha)

Improvement

  • [COOK-1976]: nginx source should be able to configure binary path
  • [COOK-2622]: nginx: add upstart support
  • [COOK-2725]: add "configtest" subcommand in initscript

Bug

  • [COOK-2398]: nginx_site definition cannot be used to manage the default site
  • [COOK-2493]: Resources in nginx::source recipe always use 1.2.6 version, even overriding version attribute
  • [COOK-2531]: Remove usage of non-existant attribute "description" for apt_repository
  • [COOK-2665]: nginx::source install with custom sbin_path breaks ohai data

v1.4.0

  • [COOK-2183] - Install nginx package from nginxyum repo
  • [COOK-2311] - headers-more should be updated to the latest version
  • [COOK-2455] - Support sendfile option (nginx.conf)

v1.3.0

  • [COOK-1979] - Passenger module requires curl-dev(el)
  • [COOK-2219] - Support proxy_read_timeout (in nginx.conf)
  • [COOK-2220] - Support client_max_body_size (in nginx.conf)
  • [COOK-2280] - Allow custom timing of nginx_site's reload notification
  • [COOK-2304] - nginx cookbook should install 1.2.6 not 1.2.3 for source installs
  • [COOK-2309] - checksums for geoip files need to be updated in nginx
  • [COOK-2310] - Checksum in the nginx::upload_progress recipe is not correct
  • [COOK-2314] - nginx::passenger: Install the latest version of passenger
  • [COOK-2327] - nginx: passenger recipe should find ruby via Ohai
  • [COOK-2328] - nginx: Update mime.types file to the latest
  • [COOK-2329] - nginx: Update naxsi rules to the current

v1.2.0

  • [COOK-1752] - Add headers more module to the nginx cookbook
  • [COOK-2209] - nginx source recipe should create web user before creating directories
  • [COOK-2221] - make nginx::source compatible with gentoo
  • [COOK-2267] - add version for runit recommends

v1.1.4

  • [COOK-2168] - specify package name as an attribute

v1.1.2

  • [COOK-1766] - Nginx Source Recipe Rebuilding Source at Every Run
  • [COOK-1910] - Add IPv6 module
  • [COOK-1966] - nginx cookbook should let you set gzip_vary and gzip_buffers in nginx.conf
  • [COOK-1969]- - nginx::passenger module not included due to use of symbolized :nginx_configure_flags
  • [COOK-1971] - Template passenger.conf.erb configures key passenger_max_pool_size 2 times
  • [COOK-1972] - nginx::source compile_nginx_source reports success in spite of failed compilation
  • [COOK-1975] - nginx::passenger requires rake gem
  • [COOK-1979] - Passenger module requires curl-dev(el)
  • [COOK-2080] - Restart nginx on source compilation

v1.1.0

  • [COOK-1263] - Nginx log (and possibly other) directory creations should be recursive
  • [COOK-1515] - move creation of node['nginx']['dir'] out of commons.rb
  • [COOK-1523] - nginx http_geoip_module requires libtoolize
  • [COOK-1524] - nginx checksums are md5
  • [COOK-1641] - add "use", "multi_accept" and "worker_rlimit_nofile" to nginx cookbook
  • [COOK-1683] - Nginx fails Windows nodes just by being required in metadata
  • [COOK-1735] - Support Amazon Linux in nginx::source recipe
  • [COOK-1753] - Add ability for nginx::passenger recipe to configure more Passenger global settings
  • [COOK-1754] - Allow group to be set in nginx.conf file
  • [COOK-1770] - nginx cookbook fails on servers that don't have a "cpu" attribute
  • [COOK-1781] - Use 'sv' to reload nginx when using runit
  • [COOK-1789] - stop depending on bluepill, runit and yum. they are not required by nginx cookbook
  • [COOK-1791] - add name attribute to metadata
  • [COOK-1837] - nginx::passenger doesn't work on debian family
  • [COOK-1956] - update naxsi version due to incompatibility with newer nginx

v1.0.2

  • [COOK-1636] - relax the version constraint on ohai

v1.0.0

  • [COOK-913] - defaults for gzip cause warning on service restart
  • [COOK-1020] - duplicate MIME type
  • [COOK-1269] - add passenger module support through new recipe
  • [COOK-1306] - increment nginx version to 1.2 (now 1.2.3)
  • [COOK-1316] - default site should not always be enabled
  • [COOK-1417] - resolve errors preventing build from source
  • [COOK-1483] - source prefix attribute has no effect
  • [COOK-1484] - source relies on /etc/sysconfig
  • [COOK-1511] - add support for naxsi module
  • [COOK-1525] - nginx source is downloaded every time
  • [COOK-1526] - nginx_site does not remove sites
  • [COOK-1527] - add http_echo_module recipe

v0.101.6

Erroneous cookbook upload due to timeout.

Version #'s are cheap.

v0.101.4

  • [COOK-1280] - Improve RHEL family support and fix ohai_plugins recipe bug
  • [COOK-1194] - allow installation method via attribute
  • [COOK-458] - fix duplicate nginx processes

v0.101.2

  • [COOK-1211] - include the default attributes explicitly so version is available.

v0.101.0

Attribute Change: node['nginx']['url'] -> node['nginx']['source']['url']; see the README.md.

  • [COOK-1115] - daemonize when using init script
  • [COOK-477] - module compilation support in nginx::source

v0.100.4

  • [COOK-1126] - source version bump to 1.0.14

v0.100.2

  • [COOK-1053] - Add :url attribute to nginx cookbook

v0.100.0

  • [COOK-818] - add "application/json" per RFC.
  • [COOK-870] - bluepill init style support
  • [COOK-957] - Compress application/javascript.
  • [COOK-981] - Add reload support to NGINX service

v0.99.2

  • [COOK-809] - attribute to disable access logging
  • [COOK-772] - update nginx download source location

Collaborator Number Metric
            

7.0.1 passed this metric

Contributing File Metric
            

7.0.1 passed this metric

Foodcritic Metric
            

7.0.1 passed this metric

License Metric
            

7.0.1 passed this metric

No Binaries Metric
            

7.0.1 passed this metric

Testing File Metric
            

7.0.1 passed this metric

Version Tag Metric
            

7.0.1 passed this metric